Details
PRIMO 401 Tile Fix – High Performance Polymer-Modified Cement-Based Adhesive
PRIMO 401 Tile Fix is a superior quality polymer-modified cement-based adhesive formulated to meet the highest requirement for tile and stone fixing. It is suitable for both internal and external applications on concrete, brickwork, plaster, and screed surfaces.
Uses
- Ideal for installing ceramic, homogeneous, marble, granite, and natural stone tiles
- Suitable for walls and floors
- Can be used in bathrooms, toilets, kitchens, balconies, open decks, swimming pools, ponds, and other wet areas
- Excellent water-resistant properties
Advantages
- Pre-mixed to ensure consistent quality
- Pre-packed for convenient handling
- Easy to mix and apply
- Suitable for both wall and floor applications
- Excellent bond strength and adhesion
- Anti-sagging formulation
- Non-toxic and eco-friendly formulation
Technical Data
| Appearance | Grey Paste |
| Mixtures / Additives | Additives to improve workability |
| Water/Powder Ratio | 8 to 9 litres of water per 40kg bag |
| Wet Density | 1700 kg/m³ |
| Tensile Adhesive Strength (28 Days) | 1.0 N/mm² |
| Tensile Adhesion Strength After Water Immersion | ≥0.5 N/mm² |
| Pot Life | 1 hour after mixing with water |
| Coverage | Approximately 1.0 m² per kg (1mm thickness) |
| Open Time @20 Mins Classification | ≥0.5 N/mm² (C1 - EN 12004 / MS ISO 13007-1) |
Application & Usage
- Surface Preparation: Remove all debris, loose mortar, dust, oil, and other foreign materials. Painted surfaces must be removed prior to the application of Primo Tile Adhesive.
- Mixing: Mix 40kg of Primo Tile Adhesive with 8–9 litres of water. Mix thoroughly with an electric mixer or manually for about 5–6 minutes until a homogeneous paste is obtained.
- Application: Spread the adhesive mixture with a notched trowel. After spreading, press tiles firmly into the adhesive bed and tap gently into position.
- Packaging: Primo Tile Adhesive 401 is packed in 40kg bags.
- Storage: Store in a dry place free from excessive moisture. Shelf life: 6 months in original packing.
- Safety & Health: Non-hazardous. In case of eye contact, rinse immediately with plenty of water. If irritation persists, seek medical attention. Use protective gloves, mask, and eye protection. Read the latest SDS before use.
- Cleaning of Tools: Clean all tools and equipment with water immediately after use. Ensure both the substrate and backs of tiles are clean before installation. Although homogeneous tiles do not need pre-soaking, always remove dust using a damp cloth or sponge.
* All technical data are based on laboratory tests. Actual data may vary due to circumstances beyond our control.
Frequently Asked Questions (FAQ)
It is suitable for internal and external applications on concrete, brickwork, plaster, and screed surfaces, for both walls and floors.
It is ideal for installing ceramic, homogeneous, marble, granite, and natural stone tiles, including use in wet areas like bathrooms, kitchens, balconies, open decks, swimming pools, and ponds.
Benefits include being pre-mixed for consistent quality, pre-packed for convenience, easy to mix and apply, suitable for walls and floors, with excellent bond strength and adhesion, an anti-sagging formulation, and a non-toxic eco-friendly mix.
Mix 40kg of PRIMO 401 Tile Fix with 8–9 litres of water for about 5–6 minutes until a smooth paste forms. Spread with a notched trowel, then press tiles firmly into place and tap gently. Ensure surfaces are clean and remove any paint before application.
View more about PRIMO 401 Tile Fix on main site