PRIMO Waterproof Screed WP303

PRIMO Waterproof Screed WP303


Specifications
Weight
40kg
Details

Primo Floor Screed Waterproof 303 – High Performance Cement-Based Floor Screed with Waterproofing

A high performance cement-based floor screed specially formulated with waterproofing polymers and additives. Ideal for wet and exterior areas requiring moisture resistance, durability, and crack protection. Excellent waterproofing properties.

Features

  • Strong adhesion to concrete and masonry surfaces
  • Smooth workability and easy application
  • Crack resistant and long-lasting durability
  • Suitable for bathrooms, balconies, rooftops, kitchens, parking garage, basement, and more
  • Waterproof barrier with excellent bond strength

Advantages

  1. 2-in-1 Function: levelling screed + waterproof barrier
  2. Pre-mixed formulation: consistent quality, easy to apply, only add water
  3. Reduces risk of water leakage and efflorescence
  4. High durability and good weather resistance
  5. Suitable for interior and exterior use
  6. Can be applied from 10 mm up to 75 mm thickness in one layer

Technical Data

Appearance Grey premixed powder
Binder Graded sand and cementitious with polymer modification
Mixing Ratio Approx. 5.5 – 6.5 L water / 40 kg bag
Density (Wet Mix) ~ 2.0 g/cm³
Compressive Strength ≥ 25 N/mm² at 28 days
Flexural Strength ≥ 6 N/mm²
Bond Strength ≥ 1.0 N/mm²
Waterproofing Impermeable to water under 1 bar pressure
Thickness Range 10 mm – 75 mm
Pot Life Approx. 60 minutes at 25°C
Coverage ~2.5 m² per 40 kg bag at 10 mm thickness
Curing Time Light foot traffic: 24 hrs / Full cure: 7 days

Application & Usage

  • Surface Preparation: Substrate must be sound, clean, and free of dust, grease, or loose particles. Dampen substrate with clean water, but avoid standing water. Apply a bonding slurry coat for maximum adhesion.
  • Mixing: Place 5.5–6.5 L clean water into a mixing container. Slowly add 40 kg of Floor Screed Waterproof 303 while mixing. Mix 3–5 minutes until homogeneous. Use mechanical mixer for best results.
  • Application: Apply mixed mortar evenly. Compact and level using trowel/straight edge. For sloped screeds, ensure proper gradient. Protect from rain and rapid drying during curing.
  • Packaging: 40kg moisture-resistant bags.
  • Storage & Shelf Life: Store in a cool, dry place away from direct sunlight. Shelf life: 12 months in unopened packaging.
  • Safety & Health: Keep out of reach of children. Use gloves, mask, and eye protection. In case of eye contact, rinse with water and seek medical attention if irritation persists. Refer to SDS before use.

* All technical data are based on laboratory tests. Actual data may vary due to circumstances beyond our control.


View more about PRIMO Waterproof Screed WP303 on main site