Details
Primo Render 201 – High Performance Cementitious Plaster & Mortar
Primo Render is a superior quality premixed cementitious plaster and mortar for brickwork and blockwork. It provides excellent bonding for plaster on concrete surfaces and mortar for brickwork and blockwork. It contains Ordinary Portland Cement, fine graded sand, polymers, and additives that provide durable quality for all plaster and mortar requirements. Suitable for both internal and external applications, it is ideal for plaster on all types of concrete surfaces, brick walls, and block walls, and also as a spatterdash coat on concrete surfaces.
Features
- Superior quality premixed plaster & mortar
- Good bonding on concrete, brickwork & blockwork
- Contains polymers & additives for workability
- Water retention properties
- Suitable for internal & external use
Advantages
- Pre-mixed to ensure consistent quality
- Pre-packed for convenient handling
- Easy to mix and apply
- High bonding strength
- Minimizes shrinkage cracking
- High durability & good weather resistance
Technical Data
| Appearance | Grey |
| Binder | Ordinary Portland Cement |
| Filler Material | Graded silica sand |
| Additives | Polymers to improve workability, water retention, and bonding |
| Bond Strength | 1.8 N/mm² |
| Water/Powder Ratio | 6.0 – 6.5 litres per 40kg bag |
| Wet Density | 2250 – 2350 kg/m³ |
| Dry Density | 2050 – 2150 kg/m³ |
| Recommended Thickness | 10 – 20 mm per layer |
| Coverage | Approx. 0.40 m² per kg (1mm thickness) |
| Pot Life | 1 hour |
Application & Usage
- Surface Preparation: All substrate defects should be rectified prior to plastering and brickwork mortar. For extremely dry brick or block walls, wet the substrate before application.
- Mixing: Mix 40kg of Primo Render with approximately 6.0–6.5 litres of water. Mix thoroughly with an electric mixer or manually for 3–5 minutes until a homogeneous paste is obtained.
- Application: Apply Primo Render onto surfaces using a steel trowel or spray machine. For mortar on brickwork/blockwork, mix correctly prior to use. Recommended thickness: 10–20 mm per layer.
- Packaging: 40kg per bag.
- Storage: Keep in a dry place free from moisture. Shelf life: 6 months.
- Safety & Health: Non-hazardous. In case of eye contact, rinse immediately with water. Wear protective gloves, clothing, and eye/face protection. Read the latest SDS before use.
- Cleaning of Tools: Clean all tools and equipment immediately with water. Hardened material must be removed mechanically.
- Basis of Product Data: All technical data are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
* All technical data are based on laboratory tests. Actual data may vary due to circumstances beyond our control.
View more about PRIMO 201 Render on main site